Lumen S20 Performance - Tesla Model S - Extra light kit

Lumen S20 Performance with only one thing in focus - pure performance and the highest possible brightness. Just pure performance!

High performance, without playing tricks with boost, made specifically for Nordic conditions!
The lamp has double approval, so it is in practice two approved lamps inside one lamp. And the slide is optimized to provide maximum brightness. Really a fantastic lamp.

The S20 Performance has an effect of an incredible 22 984 lumens, and a throw length of almost a kilometer. Here you get a rawhide of a lamp! Frameless design makes it easier to keep the lantern ice-free and dirt-free throughout the winter. The S20 also has a brother, the CS20 performance. Where the difference between the two is that the CS20 is curved at the front, while the S20 is straight. On the vast majority of cars, the CS20 fits better where it flows with the car's curved front. S20 is for cars with a flat front.

The Performance series is about getting the best possible light, but a slim profile also makes it easy to mount on most cars.

Combo beam pattern - Perfect as a high beam

Developed to provide an incredibly good slide that suits typical Scandinavian conditions. The light image is optimized for as much light as possible, spread horizontally over the road, with an additional spot in the middle. The perfect slide in a spotlight! You get a throw length of 976 meters (0.25 lux) and, in addition, a good width in the slide. The slide is very similar to the Lazer Linear 18, but you get a bit more throw in the center of the fairway, which has been missing on the Linear 18.

The LED lights in Tesla (facelift Model S without nosecone) are controlled via a data stream from the car's computer, and you therefore need a very special adapter to control additional lights so that they turn on and off together with the car's original main beam. We have therefore developed this adapter.

The adapter has been developed specifically to provide 12V control current for additional lights such as LEDs for Tesla with LED headlights, and is plug & play with the headlights and wiring in the car so that you don't have to cut cables and connect manually with soldering etc.

It is also possible to permanently switch off the additional main beam in dense fog, snow or the like. You can also switch the extra main beam permanently on without other lights on the car being activated.

Recommended additional lights for Tesla Model S - scroll down on this page.

Manuals and other information about ALC and extra lights on Tesla models can be found here!

Delivered:

• ALC lightnning control for Tesla Model S facelift (5.2016 - 2021) 

This is a complete relay set that has DTP 2-pin connectors attached for a plug and play solution for lights that have this connector.

This relay set is a great alternative if you are going to install, for example, Lumen's new Performance series. With the DTP connectors, you get a plug and play solution between the relay set, the battery and the lamps. In addition, you get a switch that has a small diode, but switches can also be removed if you don't want to use this. The DTP connector is a special connector, and is only used on larger beams that require a lot of power.

Mounting brackets in strong plastic (2 pcs) for mounting the LED bar on the Tesla Model S facelift. The brackets ensure that the lights are attached securely and securely to the car.

The mounts have 4 holes in height so that you can mount your LED bar as high as possible in relation to the LED bar's design. For example, Rigid's SR series can be mounted at the top, while the E series from the same manufacturer must be mounted further down. Different mounting heights make it possible to mount your lantern as high as possible so that you get the best possible light output.

Delivered:

• 2 black mounting brackets for Tesla Model S facelift

NB:

• Screws to mount firmly to the car are not included. We recommend farm screws / construction screws
• If anything other than these screws is used, we give no guarantee on the durability of the fasteners