The LED lights in Tesla (facelift Model S without nosecone) are controlled via a data stream from the car's computer, and you therefore need a very special adapter to control additional lights so that they turn on and off together with the car's original main beam. We have therefore developed this adapter.
The adapter has been developed specifically to provide 12V control current for additional lights such as LEDs for Tesla with LED headlights, and is plug & play with the headlights and wiring in the car so that you don't have to cut cables and connect manually with soldering etc.
It is also possible to permanently switch off the additional main beam in dense fog, snow or the like. You can also switch the extra main beam permanently on without other lights on the car being activated.
Recommended additional lights for Tesla Model S - scroll down on this page.
Manuals and other information about ALC and extra lights on Tesla models can be found here!
Delivered:
- ALC lightnning control for Tesla Model S facelift (5.2016 - 2021)
- Older Model S (2013 - 2016.5) with xenon lamps do not need an ALC. On older cars, the car's xenon lamps have 12V high beam control, and this can be connected to a relay for the control of additional light
- ALC cannot drive the led bar - you need a relay kit as well
Comments