Lazer 18 Elite+ - Tesla Model S (16-20) - extra light

Lazer Linear 18 Elite+ LED high beam. Upgraded - More powerful and more features!

The new plus version of the Lazer Linear 18 Elite is upgraded with more lumens and more features! This is one of the most powerful, approved lamps for Lazer. It is an unbelievably raw extra light with a whopping 21,000 lumens in boost mode, and over 1,200 meters of throw. The LED bar has the complete slide that not only gives you good length, but an incredibly nice width in slide. Here you really get everything you can dream of from a high beam and it is perfectly suited to be installed as a low profile or recessed.

The Plus version of the Linear 18 comes with four different light modes that can be controlled with a switch. A memory function in the lamp will also remember which mode was active the last time you used it. It combines white light at 5000 kelvin with yellow LED chips for an optimal driving experience. Yellow light is perfect for driving in snow and fog. Here is an overview of the different modes:

• Boost (white light),
• Combo (white and yellow light),
• Snow and fog (yellow light)
• ECE (only white and approved light).

High power, fantastic slide, several functions and very nice design are good reasons to choose this particular lamp. Lazer also has incredibly good quality and comes with a 5-year warranty.

Wide extra light slide

A wide slide is perfect for those who drive on a wide variety of roads. The cast length is well over a kilometre, which is suitable on longer plains where the speed is higher where you need visibility far ahead. The width helps you get the light well into the bend, and an overview of animals and other details along the road. In other words, you get everything you need from a high beam in one and the same lamp.

Delivered:

• 1 Lazer Linear 18 Elite +.
• 1 complete relay set and anti-theft side brackets.

The LED lights in Tesla (facelift Model S without nosecone) are controlled via a data stream from the car's computer, and you therefore need a very special adapter to control additional lights so that they turn on and off together with the car's original main beam. We have therefore developed this adapter.

The adapter has been developed specifically to provide 12V control current for additional lights such as LEDs for Tesla with LED headlights, and is plug & play with the headlights and wiring in the car so that you don't have to cut cables and connect manually with soldering etc.

It is also possible to permanently switch off the additional main beam in dense fog, snow or the like. You can also switch the extra main beam permanently on without other lights on the car being activated.

Recommended additional lights for Tesla Model S - scroll down on this page.

Manuals and other information about ALC and extra lights on Tesla models can be found here!

Delivered:

• ALC lightnning control for Tesla Model S facelift (5.2016 - 2021) 

Mounting brackets in strong plastic (2 pcs) for mounting the LED bar on the Tesla Model S facelift. The brackets ensure that the lights are attached securely and securely to the car.

The mounts have 4 holes in height so that you can mount your LED bar as high as possible in relation to the LED bar's design. For example, Rigid's SR series can be mounted at the top, while the E series from the same manufacturer must be mounted further down. Different mounting heights make it possible to mount your lantern as high as possible so that you get the best possible light output.

Delivered:

• 2 black mounting brackets for Tesla Model S facelift

NB:

• Screws to mount firmly to the car are not included. We recommend farm screws / construction screws
• If anything other than these screws is used, we give no guarantee on the durability of the fasteners

Wireless relay. - 433Mhz

We use this to be able to remotely control on/off of the LED bar. Can be coded up against most homelink systems. Can also be used for garage doors.

Delivered:

• 1-channel 433Mhz wireless 12V relay
• Remote control