Black "Model 3" emblem in two different fonts for your Tesla Model 3 - in original quality.
Easy to assemble - see video below. We recommend that such emblems are mounted when the temperature is at least +10 degrees, and please heat the emblem carefully after mounting for even better adhesion.
- Determine the location, and wipe the area clean with the alcohol wipe provided
- Mark with masking tape or similar for a 100% level position
- Carefully remove the white tape on the back so that the letters remain in the template
- Place the emblem lightly against the paintwork, do not press too hard in case you need to change something
- If you are satisfied, press the letters into the lacquer with even pressure. Feel free to use a cloth or similar. Carefully remove the clear film and then the template
- Avoid contact with water for the next 24 hours
Choose between the "Modern" and "Traditional (Serif)" fonts. Both are in satin black
Comments