Checkout
Total: 0

Menu

Shopping Cart / 0 products

Your cart is empty

Not sure where to start?
See our new products
TOTAL 0,-
Gratis frakt over 499,- (kundeklubb) | Stort utvalg | Rask handel

Rear spoiler / trunk spoiler for the Tesla Model 3. Supplied in a matt finish and with a carbon look. The spoiler is in the same style as the spoiler delivered with the Tesla Model 3 Performance.

Manufactured in ABS plastic.

The trunk spoiler is glued to the car with the supplied double-sided tape.

Assembly:

  1. Recommended installation temperature is +15 degrees or more.
  2. Clean the car thoroughly before installation.
  3. Test fit the spoiler without removing the protection from the tape.
  4. Measure up so that you can center the assembly.
  5. Remove the protection from the tape and install. Feel free to use extra heat from, for example, a hair dryer to ensure good adhesion between the spoiler and the car
  6. Leave the car warm for as long as possible after installation, preferably 24 hours, and we recommend taping the spoiler to the car while the glue hardens.
  7. The car should not be washed for at least 3 days after installation.

 

Comments

Trunk spoiler Tesla Model 3 Matt carbon

PÅ LAGER - under 10 igjen, 1-4 dagers leveringstid
Gir 60 bonuspoeng til medlemmer ved kjøp
1.358,-
Please select

Rear spoiler / trunk spoiler for the Tesla Model 3. Supplied in a matt finish and with a carbon look. The spoiler is in the same style as the spoiler delivered with the Tesla Model 3 Performance.

Manufactured in ABS plastic.

The trunk spoiler is glued to the car with the supplied double-sided tape.

Assembly:

  1. Recommended installation temperature is +15 degrees or more.
  2. Clean the car thoroughly before installation.
  3. Test fit the spoiler without removing the protection from the tape.
  4. Measure up so that you can center the assembly.
  5. Remove the protection from the tape and install. Feel free to use extra heat from, for example, a hair dryer to ensure good adhesion between the spoiler and the car
  6. Leave the car warm for as long as possible after installation, preferably 24 hours, and we recommend taping the spoiler to the car while the glue hardens.
  7. The car should not be washed for at least 3 days after installation.

 

Alternative produkter

Kunder som så på dette så også på

Customers also bought

-62%
Image of Carbon fiber Cover for steering wheel Tesla Model 3 / Y
På lager i
Matt karbon, Blank karbon

Covers in real carbon for the steering wheel in...

1.038,- 398,-
-30%
Image of Cup holder insert Tesla Model 3 & Y (2021-->)
På lager

Simple and ingenious cup holder insert for...

158,- 111,-
-45%
Image of Floor mat trunk Tesla Model 3 2021 - 23
På lager

Rubber mat for trunk / trunk for Tesla Model 3...

718,- 395,-
Kundeklubb
Image of Armrest storage box Tesla Model Y & 3 (2021->)
På lager

Do you miss the storage box that was under the...

199,-
Medlemspris: 175,-
-30%
Image of USB-hub for center console - Tesla Model Y & 3 (2021->)
På lager

USB connection docking with light for Tesla...

478,- 335,-
Kundeklubb
Image of Jack pad red ring Tesla Model S/3/X/Y
På lager i
1 pc, 4 pcs - with storage box

Protect your Tesla Model S/3/X/Y from damage...

135,-
Medlemspris: 119,-
×