Covers in carbon effect for the turn signals of the Tesla Model 3 up to and including 2020.

Manufactured from UV-stabilised ABS plastic, with glossy or matt finish, and easy to assemble in a short time.

Assembled:

1. Covers the chrome on the turn signals, but not the cameras or the turn signals themselves. Clean the chrome, preferably on a warm day with at least +15 degrees.
2. Before you remove the protective film (red) on the tape, do a trial fitting. The 3M VHB tape is strong and adheres quickly to the substrate, so be careful to cover all the chrome on the first try. Start at the back, and work your way along the top before flipping the cover down over the chrome.
3. Once the technique is in place, remove the protection on the tape. Without touching the tape.
4. Carefully replace the cover. avoid pressing down on the tape.
5. Only press down on the tape when you are 100% satisfied with the placement. Use a dry, clean cloth or similar for even pressure on the entire cover.
6. After installation, the tape will need approx. 24 hours of curing at a good temperature. Preferably above +20 degrees. If it is colder, curing will take longer. Avoid washing the car or driving in rainy weather before curing is complete.