Trunk spoiler Tesla Model Y in matt finish and carbon look.

Manufactured in ABS plastic

Assembly:

1. Recommended installation temperature is +15 degrees or more.
2. Clean the car thoroughly before installation.
3. Test fit the spoiler without removing the protection from the tape.
4. Measure up so that you can center the assembly.
5. Remove the protection from the tape and install. Feel free to use extra heat from, for example, a hair dryer to ensure good adhesion between the spoiler and the car
6. Leave the car warm for as long as possible after installation, preferably 24 hours, and we recommend taping the spoiler to the car while the glue hardens.
7. The car should not be washed for at least 3 days after installation.