Avoid unnecessary scratches on the rear bumper from carrying bags or other things.
Self-hardening film in TPU material that protects your car's paintwork well against external influences. The film is resistant to UV light, salt, temperatures, moisture and chemicals.
Fits Telsa Model 3 Highland
Foil thickness 0.195mm
Equipment:
- Small squeegee
- Water
- Spray bottle
- Liquid soap
Clean the surface thoroughly before installation. Small impurities on the paint will make installation more difficult. Mix water and soap in a spray bottle - approximately 1ml soap to 1l water. Have clean water available to remove soap residue from the edges during installation.
Assembly:
- Ensure that the mounting surface is between +10 and 32?
- Clean the surface - preferably with isopropanol or similar to remove grease, oils, dirt, etc.
- Clean your hands and spray your hands with a little soapy water.
- Remove the paper from the foil.
- Spray soapy water on the paint and on the back of the foil
- Place the foil on the paint and "slide" it into the correct position.
- Spray a little soapy water on the top side of the foil so that the squeegee glides more easily on the surface.
- Work the soapy water out from the back of the foil with light movements so that the foil does not stretch or move.
- Rinse corners and edges with water if the foil does not stick properly.
After installation, the car should be left dry and warm for 24 hours before use. We recommend that the car not be washed for at least 3 days after installation.
Comments