Alcohol-based rubber renewer, made especially for surfaces that should not become slippery - such as pedals and mats. Apply to a clean and dry surface, a thin layer lasts a lot. Allow to air dry.
How to use:
- Clean the rubber mats with an alkaline agent (e.g. Green Star or Vorreiniger B) by applying with a spray bottle or foam cannon.
- Scrub well with a stiff brush (e.g. Vikan Nail Brush) to remove all dirt.
- Rinse with water and let dry.
- Spray 1-2 times on the carpet, and spread with an applicator sponge, or spread with the sponge if you don't use a spray bottle.
- Let dry. If necessary, go over with a microfiber if you have applied a little too much Gummifix.
Comments