Model 3 emblem - satin black

Black "Model 3" emblem in two different fonts for your Tesla Model 3 - in original quality.

Easy to assemble - see video below. We recommend that such emblems are mounted when the temperature is at least +10 degrees, and please heat the emblem carefully after mounting for even better adhesion.

1. Determine the location, and wipe the area clean with the alcohol wipe provided
2. Mark with masking tape or similar for a 100% level position
3. Carefully remove the white tape on the back so that the letters remain in the template
4. Place the emblem lightly against the paintwork, do not press too hard in case you need to change something
5. If you are satisfied, press the letters into the lacquer with even pressure. Feel free to use a cloth or similar. Carefully remove the clear film and then the template
6. Avoid contact with water for the next 24 hours

Choose between the "Modern" and "Traditional (Serif)" fonts. Both are in satin black