Checkout
Total: 0

Menu

Shopping Cart / 0 products

Your cart is empty

Not sure where to start?
See our new products
TOTAL 0,-
Gratis frakt over 499,- (kundeklubb) | Stort utvalg | Rask handel

Vi har flyttet!

Ny adresse - Olstadvegen 3, 2040 Kløfta

Lazer Glide 18 - Tesla Model 3

In stock: 3
Gir 464 bonuspoeng ved kjøp
9.278,-
8% Discount Pris utenom pakke 10.036,-
  • 1

    Produkter

    Skjul detaljer

    Lazer® Glide 18 Elite LED

    More information

    Lazer® Glide 18 Elite LED additional light - 12800 lumens - 624 meter throw length (1lux)

    The world's first "shaped" led bar. The Glide series from Lazer has a completely unique molded glass construction that provides a robust and powerful led bar with as little weight as possible. Lazer Glide is a 20" approved curved led light in an ultra-low profile combined with exceptional light performance of 12800 lumens, 624 meter throw length (1 lux), and a dispersion angle of 66°. An led light very well suited to match the front of a range of passenger cars and other vehicles.

    Built into each Glide lamp is a Dynamic Dip mode that provides a smooth transition between high and low power modes. The low output mode allows driving in accordance with UNECE Regulation 149 where local laws require it, and/or a reduced power that for example reduces glare from highly reflective surfaces such as large road signs. The Dynamic Dip function is activated after the light has been on for >2 seconds by simply and quickly flashing the light off and on again.

    High power, fantastic light, the Dynamic-Dip function and very nice design are good reasons to choose this particular lamp. Lazer also has incredibly good quality and comes with a 5-year warranty.

    • "Formet" ledbar med "injection-moulded" glass.
    • Buet og ultralav-profil design forenkler kjøretøyinstallasjon av OE-kvalitet
    • Inkorporering av de nyeste høyintensive "premium bin" LED dioder
    • Kombinerte vakuummetalliserte spot- og brede optiske systemer gir optimal lysfordeling
    • Dynamic Dip-funksjon for overgang mellom høy- og laveffektmodus
    • UNECE-godkjent Reg 149 (Klasse B kjørelys) for fjernlysfunksjon på vei – kun laveffektmodus
    • Valgfri integrert funksjon for hvitt posisjonslys – UNECE Reg 148 godkjent
    • Bruk av svarte PCB-er for et moderne og snikende utseende
    • 'Uknuselig' polykarbonatlinse med hardcoat (med livstidsgaranti*)
    • Teksturert effekt på undersiden av polykarbonatlinsen for et unikt estetisk utseende
    • 5000K LED-fargetemperatur og høy 80CRI maksimerer skarphet og definisjon
    • Leveres med sidemonteringssett – sikkerhetsfestesett er også tilgjengelig
    • Elektronisk termisk styringssystem optimerer lyseffekten for å bevare levetiden til lysdiodene
    • Intern forbehandling og topplakk i pulverkvalitet for bilindustrien for ultimat korrosjons- og kjemisk beskyttelse
    • Overspenningsbeskyttet
    • Beskyttet mot omvendt polaritet
    • UNECE-godkjent Reg 10
    • IP68 vanntett – 1,5 m nedsenking (30 minutter)
    • 5 års garanti
    • 25 cm kabel med medfølgende hann/hun 2 eller 3-pinners Superseal-kontakter
    • Designet og produsert i Storbritannia

    ALC v.3 Lightning control adapter - Tesla Model 3 / Y / S

    More information

    ALC control current adapter for mounting additional lights on your Tesla Model 3, Y and S 2022+ (Plaid and long rage).

    With support for adaptive high beams (matrix)!

    The LED lights in the Tesla Model 3, Y and S 2022+ (Plaid and long rage) are controlled via a data stream from the car's computer, and you therefore need a very special adapter to control additional lights so that they turn on and off together with the car's original high beams. We have therefore developed this adapter - which we call ALC.

    The adapter has been developed specifically to provide 12V control current for additional lights that can be led for the Tesla Model 3, Y and S 2022+ (Plaid and long rage), and is plug & play with the headlights and wiring in the car so that you don't have to cut cables and connect you manually with soldering etc.

    It is also possible to permanently switch off the additional main beam in dense fog, snow or the like.

    See recommended additional lights and accessories at the bottom of the page.

    Delivered:

    • Plug & play wiring harness and control box for Tesla Model 3, Y and S 2022+ (Plaid and base)
    • ALC cannot drive the led bar - you need a relay kit as well
     
    Notes:
    • Does not affect the use of "auto high beam" / adaptive high beams (matrix)
    • Does not affect other original light functionality

    Lumen Superseal relésett

    More information

    Komplett relésett som har påmontert Superseal kontakter for en plug and play løsning for lykter som har denne kontakten. Lazer blant annet bruker Superseal kontakter på alle sine lamper. Dette er et kraftig og kvalitetsikkert relésett med et relé som håndterer opp til 80A og har en sikring på 30A.     

    Spesialtilpasset  

    Dette relésettet er et supert alternativ om du skal montere Lazer-lamper. Med superseal kontaktene får du en plug and play løsning mellom relésettet, batteriet og lampene. I tillegg får du med en bryter som har en liten diode, men brytere kan også taes vekk om man ikke ønsker å bruke dette.   

    Teknisk informasjon 

    Kontaktene som brukes på dette relésettet er standard 2-pins Superseal kontakter. Superseal er en universal kontakt-type på lik linje med Deutsch. Om du har lamper som bruker superseal kontakter vil dette relésettet passe perfekt.

    Hva følger med i pakken?

    • Ett komplett relésett med bryter. 

    Montering ledbar Tesla Model 3/Y

    More information

Lazer® Glide 18 Elite LED is a curved led bar that fits perfectly on your Tesla Model 3 - 12800 lumens - 624 meter throw length (1lux).

Fits all models!

The world's first "shaped" extra light. The Glide series from Lazer has a completely unique molded glass construction that provides a robust and powerful articulated bar with as little weight as possible. Lazer Glide is a 20" approved curved LED in an ultra-low profile combined with exceptional light performance of 12,800 lumens, 624 meter throw length (1 lux), and a dispersion angle of 66°.

Works seamlessly with "Adaptive high beams / Matrix" thanks to the ALC control module.

 

Built into the Glide lamp is a Dynamic Dip mode that provides a smooth transition between high and low power modes. The low output mode allows driving in accordance with UNECE Regulation 149 where local laws require it, and/or a reduced power that for example reduces glare from highly reflective surfaces such as large road signs. The Dynamic Dip function is activated after the light has been on for >2 seconds by simply and quickly flashing the light off and on again.

High power, fantastic slide, the Dynamic-Dip function and very nice design are good reasons to choose this particular lamp. Lazer also has incredibly good quality and comes with a 5-year warranty.

ALC control module - developed and manufactured in Norway!

Included in the package is the Norwegian-developed ALC control module. It doesn't get simpler and safer - plug & play connection with original connectors to one of the car's headlights! The led bar's light follows the car's main beam seamlessly when you use ALC. At the same time, you also have the option to easily deactivate the led bar in challenging weather conditions such as in fog, snow or other situations. All while driving, and without taking your eyes off the road. You simply only flash the light horn 5 times while driving. Then the led bar will be deactivated, and will not be switched on when the car's main beam is activated.

What comes with it?

  • Lazer® Glide 18 Elite LED curved auxiliary light
  • Relay set

  • ALC - TM3 control module - the world's only plug&play adapter

Comments

Alternative produkter

Kunder som så på dette så også på

×